A Step-by-Step Guide on How to Maintain and Clean the Refillable Vape Pods

Refillable pods play an integral role in the functioning of vape kits and devices. These devices are designed in a way that they repeatedly come in contact with e-liquids, due to which they require proper maintenance, which will ensure long-term usage, optimal performance, and a satisfying vaping experience. 

Neglect of proper care and maintenance will lead to a lack of performance, a nasty burnt taste, or maybe your device will stop working, leading to device failure. The following steps will guide you on how to take proper care of your device. It will cover deep cleaning and safety tips.

Daily Maintenance

Every day care or routine will prevent your device from building up residue or malfunction. To achieve this, all we have to do is be mindful of and follow some steps, which include checking for leaks. Whenever you are about to refill your pod tank, you must inspect the seal and O-rings, plus the connections. When you have refilled the container, always wipe off the excessive e-liquid with a lint-free cloth, which will avoid the risk of residue sticking to the container.

Besides that, it is important to clean and wipe the exterior of the pod too. Make use of a damp microfiber cloth for cleaning the exterior body of the pod. Another very helpful and useful tip is to avoid overfilling! You should only fill to the marked line or area, which will prevent any airflow issues and leaks.

Moreover, the place where you store your pod also affects and alters its performance, thus, it is important to know that factors like heat and light will change the chemical composition of your e-liquids. Hence, store your pod upright in a cool area and dry place that is away from direct sunlight. As it may cause burning of your coil or explosion of your pod, plus avoid leaving your pods in the car for safety reasons.

How to Clean Your Refillable Pods?

Cleaning your pods in the correct way will enhance their overall performance and life. Follow these quick and easy steps every week or two. For better results, repeat these every time you change or switch your e-liquid flavors.

Step 1

Firstly, you need to disassemble the pod, i.e, separating and unwinding all individual parts of your pod for better results. To disassemble, take help from the user manual or guides available over the internet, according to your vape model. 

Step 2

Secondly, make use of hot or lukewarm water to wash or rinse each part of your pod. Remember that you do not use boiling water because it will damage the plastic part of your pod.

Step 3

Additionally, if you still notice some residue left on your pod, then soak or dip your pod in distilled water for 15 to 20 minutes to get rid of any residues left behind. 

Step 4

It is important to sanitize the parts since a vape is just like any other consumable product that requires proper cleaning and hygiene. You can sanitize these with the use of rubbing alcohol. Rub these on all the parts 

Step 5

Shake out any excess liquid and let the pod air dry completely. Place it on a paper towel upside down for effective absorption.

Step 6

Once completely dried, reassemble the parts carefully, ensuring that you put the components together in their right place. 

For more satisfactory results, you can add some more steps like keeping individual parts in lukewarm water, mixed with dish soap or shampoo. Soak all the parts of the pod in this mixture. This step will help clean away any grease on the pod. 

Priming the new coil is also essential. This is done by applying e-liquid to the cotton wick and then applying it to the coil before use.

What are the Issues Faced?

While the refillable pods are convenient to use, they may pose some issues that need to be fixed. 

Leaks

Brimming the pod with e-liquid or cracked bottles may cause leakage in pod kits; thus, make sure not to overfill the pod. The rubber gaskets and caps should be intact.

Burnt Taste

Some of the users may feel a burnt taste, maybe because of a dry wick or an expired coil. The solution to this is to change the coil after 1 or 2 weeks and to lower our device's power. Being mindful of these issues will help increase the lifespan of pods.

Weak Vapour Production

Poor connection, damaged coil, and battery issues may result in weak or no vapour production. Thus, check the battery if it is fully charged or drained. Replacing the pod or coil may also help.

Build-ups

You may also face some condensation buildup due to tighter draws. For this, you need to wipe off the mouthpiece after use, clean the pod slot, and keep the device in an upright position to prevent leaks and condensation. 

Final Thoughts

Looking after your vape device and properly maintaining the pods will not only help increase the lifespan but also ensure a smooth and satisfactory vaping session. By observing these simple steps, like looking for leaks, storing your device correctly, and avoiding overfilling, you can prevent the issues beforehand.